Press "Enter" to skip to content

Abrasion & Wear Resistance Products

Resimac abrasion and wear-resistant materials and coatings have a proven track record within the industry and are designed to be applied to process equipment and structures in the most demanding of operating environments. The ceramic enhanced product range is based on the latest solvent-free epoxy technology and is ideally suited to rebuilding & resurfacing equipment and components.

This product range can be used on pumps, valves, internal pipe surfaces, heat exchangers, condensers, separators, filters, bow thrusters, rudders, A-frames, P-brackets, and cyclones. Some of the benefits include rebuilding damaged or worn surfaces, repairing expensive working assets, suitability for confined space applications, extension of the working life of the equipment, long-term asset & equipment protection, eradication of the need for hot works/ welding, and a reduced health and safety risk.

For pricing information, inquire here.


201 Ceramic Repair Paste

201 ceramic repair paste

Resimac’s 201 Ceramic Repair Paste is a rebuilding paste grade for badly pitted and scarred surfaces. This paste is a two-component, solvent-free, epoxy repair paste containing hardened ceramic particles to give outstanding abrasion resistance. Additionally, it is suitable for emergency repairs or part of planned maintenance to equipment such as worn impellers, damaged valves, eroded separator housings, damaged pump casings, eroded pipework, propellers, bow thrusters, rudders, corroded water boxes, and eroded endplates and tube sheets. Resimac 201 Ceramic Repair Paste, once cured, can be overcoated with Resimac 202 Ceramic Fluid or 203 Super Flow efficiency coating.

For pricing information, inquire here.

Properties:
 Solvent Free Epoxy Technology
 High Build Capability
 2 Component
 Apply using Spatula or Applicator Tool
 No Shrinkage
 Superior Abrasion Resistance
 High Chemical Resistance
Uses:
Separators & Filters
A-frames & P-brackets
Cyclones
Internal pipe surfaces
Heat exchangers
Condensers
Process vessels
Documents:
Brochure
Technical Data
Specifications
Application Guide
Chemical Resistance
Testing and Cure Times
Typical Applications

202 Ceramic Repair Fluid

202 Product Image

Resimac’s 202 Ceramic Repair Fluid is a two-component, solvent-free epoxy repair fluid containing hardened ceramic particles to give outstanding abrasion resistance. The product can be used to resurface worn or damaged metallic surfaces subject to fluid erosion and corrosion.

Can be used to rebuild damaged surfaces such as eroded pump casings and impellers, eroded filter surfaces, corroded tube sheets, end plates and water boxes, internal pipe surfaces and elbows, eroded bow thruster tunnels and liners, separator housings, bow thruster tunnels, cyclones, centrifuges, and process vessels.

For pricing information, inquire here.

Properties:
No shrinkage
Brush applied
Suitable for all bonds to metal and composites
High chemical resistance
Ideal for high particulate fluids and slurries
Documents:
Brochure

Technical Data
Application Guide
Specifications
Chemical Resistance

203 Super Flow

Resimac’s 203 Super Flow is a two-component, solvent-free epoxy flow efficiency coating containing hardened ceramic particles to give outstanding abrasion resistance. The product can be used to resurface worn or damaged metallic surfaces subject to fluid erosion and corrosion and is proven to improve flow rates through process equipment.

For pricing information, inquire here.

Features:
2 Component
Brush Applied
Flow Efficiency Coating
Fluid Abrasion Protection
Uses:
Eroded pump housings
Corroded tube sheets, end plates
Internal pipe surfaces & elbows
Leading-edge of rudders & A-frames
Eroded centrifuge surfaces
Fans & fan housings
Documents:
Brochure
Technical Data
Specifications
Application Guide

205 Ceramic HT Fluid

Resimac’s 205 Ceramic HT (High Temp Hydrocarbon Immersion) Fluid is a 2 component solvent-free, epoxy novolac coating. The product has been designed to be applied to process equipment, pipelines, and structures subject to erosion and corrosion. The product once cured is suitable for immersion conditions in water, salt water, and aqueous hydrocarbon mixtures at temperatures up to 130˚C. The coating contains ceramic particles to give a hardened finish to metallic surfaces subject to abrasion from high particulate liquids and slurries.

For pricing information, inquire here.

Features:
Applied By Brush
High Build Coating
Solvent Free Epoxy
Contains Hardened Ceramic Particles
Up to 265℉/ 130℃ Temp Resistance
Acids, Alkalis & Hydrocarbons
Uses:
Chemical storage tanks
Process vessels
Heat exchangers
Seawater filters
Internal pipeline surfaces
Pumps & Valves
Documents:
Brochure

Technical Data
Specifications
Application Guide

206 Ceramic HTA Fluid

Resimac’s 206 Ceramic HTA (High Temp Acid Immersion) Fluid is a two-component, solvent-free epoxy, novolac repair fluid that is applied in 2 coats at 500-600 microns per coat. The product is suitable for metallic surfaces, can resist continuous immersion conditions in hydrocarbons and acidic media up to 110˚C, and protects against acids and high concentration industrial chemicals.

For pricing information, inquire here.

Features:
Applied By Brush
High Build Coating
Solvent Free Epoxy
Contains Hardened Ceramic Particles
Up to 265℉/ 130℃ Temp Resistance
Acids, Alkalis & Hydrocarbons
Uses:
Chemical storage tanks
Process vessels
Heat exchangers
Seawater filters
Internal pipeline surfaces
Pumps & Valves
Documents:
Brochure
Technical Data
Specifications
Application Guide

U-Coat © 2020