Press "Enter" to skip to content

Primers

Our range of primers allows the user to coat damp, porous, or newly laid cementitious surfaces, or prime manually or mechanically prepared metallic surfaces. Our primers can be overcoated using any chemical or corrosion protection coating in the Resimac range. Products include: low viscosity penetrating concrete primer, low viscosity consolidating concrete primer, thin-film metal surfaces primer, moisture-cured metal surfaces primer, and water-based thin film primer.

For pricing information, inquire here.


503 SPEP (Fast Curing)

Resimac’s 503 SPEP is a two-component solvent-free epoxy penetrating concrete primer. This product has been developed for use on newly laid or porous concrete and cementitious surfaces. On curing the product consolidates the substrate and helps to improve adhesion during the application of other coating systems.

For pricing information, inquire here.

Features:
Two-Component
Ideal for Sealing Concrete
Apply by Brush, Roller, or Spray
Solvent Free Epoxy Technology
Uses:
Steps
Floors
Ramps
Seal concrete surfaces
Documents
Brochure
Specifications
Technical Data
Application Guide

505 Damp Seal

Resimac’s 505 Damp Seal is a low viscosity solvent-free epoxy primer designed to seal and consolidate green or wet concrete and cementitious surfaces. The coating penetrates deep into the concrete surfaces to ensure high mechanical adhesion. This product can be used to seal newly laid concrete and can be overcoated by any of the Resimac Chemical and Corrosion Protection coatings.

Used with the PolySteel/Con-GFS Pro17 or PolyAqua coating powder

For pricing information, inquire here.

Features:
Designed for damp surfaces
Consolidates/ seals porous surfaces
Penetrates deep into the concrete surface
Improves adhesion of epoxy/ PU topcoats
Cures at temps 10˚C (50˚F) and up
Tolerant of less than ideal surface prep
Seals/ prevents further ingress of moisture
High mechanical adhesion top-coats
Uses:
Steps
Floors
Ramps
Seal concrete surfaces
With glass fiber fabrics
Documents:
Base Safety Data
Activator Safety Data
Application Guide
Technical Data
Specifications
Primer Info

506 Aluprime

Resimac’s 506 Aluprime is a two-component, solvent-based, thin-film epoxy coating that has been designed to be applied to manual or mechanically prepared metallic surfaces. The coating offers excellent corrosion and weathering resistance and if required can be overcoated with any of the Resimac UV stable topcoats.

For pricing information, inquire here.

Features:
Surface tolerant
Two-component
Thin-film coating
Apply by brush, roller, or spray
Solvent-based epoxy technology
Low-temperature cure (41℉/ 5℃)
Uses:
Storage tanks
Structural steel
Railings & barriers
Road & rail bridges
Concrete structures
External pipe surfaces
Documents:
Brochure
Technical Data
Specifications
Application Guide

U-Coat © 2020